|
| |
Wood Seal
Fast-Drying Water-Based
Floor Seal (226SF)
Features
 |
Water-based seal for new or newly sanded wood floors. |
| Perfect
for gym floors, racquetball courts, dance floors and other wood surfaces.
|
|
Non-yellowing, fast-build formulation prepares wood for finish layers.
|
| Easily
abrades smooth with standard floor pads. |
| Fast
drying - 60 minutes under normal conditions. |
Properties*
|
Type - Acrylic Emulsion |
|
Form - Opaque Liquid |
|
Odor - Bland |
|
Color - Milky White |
|
Weight per Gallon - 8.73 Lbs. |
|
pH - 7.3 - 8.3 |
|
Floor Solids - 30% |
|
Coverage - Up To 600 Sq. Ft. Per Gallon |
|
Slip-Resistance - N/A |
|
V.O.C. Content - < 350 gm/l |
*
Properties are typical and subject to usual manufacturing tolerances.
General Directions**
WOOD
PREPARATION:
- Sand
floor using appropriate procedures. All old finish or wax should be removed.
- Finish
sanding with a new 120 to 150-grit screen. Do not use steel wool.
- Vacuum
all dust and tack with clean, water dampened towels or microfiber pads that
have been tightly wrung out. Tack until all dust has been removed.
- Allow
floor to dry until there is no sign of moisture.
SEAL APPLICATION:
(use on any new or newly sanded floors)
- Check
moisture content of wood. It should be 10% or less before sealing.
- Apply
seal with a weighted T-bar.
- Allow
first coat to dry 1 hour (longer dry times will be necessary under high
humidity). Recheck floor with moisture meter. If moisture reading is higher
than starting point, allow more dry time.
- Buff
floor smooth with a green or maroon pad. DO NOT BUFF WITH SAND SCREENS.
- Tack
until all dust has been removed with clean, water-dampened towels or
microfiber pads that are tightly wrung out.
- Apply
second coat of seal using a weighted T-bar. Allow 12 or more hours of cure
time.
- Repeat
steps 4 – 5 from above.
- If
desired, paint game lines using a high quality, 100% acrylic latex paint. If
not painting, proceed to step 10 below.
- Allow
game lines 24 hours of cure time. Then buff the lines with a green or maroon
pad and tack the entire floor as directed in step 5 above.
- Apply 3
coats of Sport Kote® Water-Based Urethane Wood Finish or Satin Sport Kote. See
product label for complete details.
Note:
If any grain raising is noticed between coats of Sport Kote, buff the floor
smooth with a green or maroon pad and tack.
** See
label directions and MSDS for complete usage and safety instructions.
Application Hint
- Under
high humidity and high temperatures, dry times for Wood Seal will vary
greatly. Do not apply a second coat if the first coat is still tacky.
Packaging Specifications
|
Package
|
Sizes
Available
|
UPC Codes
|
Pack
Size
(inches)
|
Cube
(ft.)
|
Pack
Wt.
(Lbs.)
|
Full
Pallet
|
|
|
2 x 2˝ Plastic
Container
|
783366226030
|
14 x
9.5 x 15.25
|
1.17
|
46.51
|
36
|
|
