Deep
cleans by removing grease, dirt, shampoo build-up, salt, residue, etc.
Not
harmful to internal equipment parts - contains corrosion inhibitors and
softening agents.
For
portable or truck-mount extraction units.
Very
low foam - separate anti-foam not normally needed.
Properties*
Type - Anionic Detergent
Form - Clear Liquid
Odor - Citrus
Color - Green
Weight per Gallon - 8.99 Lbs.
pH - 12.4-13.0
pH Use Dilution (1:128) - 9.5
Foam Height
- Low
Actives - >15%
*
Properties are typical and subject to usual manufacturing tolerances.
General Directions**
Be sure
to check carpeting for colorfastness to the recommended solution prior to
cleaning. Move all furniture from area. Vacuum thoroughly.
Pretreat area being cleaned. Spray directly on extremely soiled areas, spots
and traffic areas before extracting.
Mix
Extractor Rug Shampoo with hot water as recommended before injecting into
extractor system. Introduce defoamer into pickup tank and hose if excess
residual suds are indicated.
Regular
Soil: Dilute 1 ounce per gallon (1:128) of hot water for use in extractor
equipment.
Heavy Soil: For heavily soiled carpet with greasy build-up and excess of old
shampoo and residue, use as much as 3 ounces per gallon (1:40) of hot water. A
second application may be necessary for stubborn spots and heavy traffic
areas.
When
carpet is dry, replace furniture. If still damp, be sure to use aluminum foil
or wax paper under metal casters to prevent rust spots from forming.
** See
label directions and MSDS for complete usage and safety instructions.
